ㆍ
Study on the Water-Vapor Permeation through the Al Layer on Polymer Substrate
|
최영준 Young Jun Choi , 하상훈 Sang Hoon Ha , 박기정 Ki Jung Park , 최영선 Young Sun Choe , 조영래 Young Rae Cho |
KJMM 47(12) 873-880, 2009 |
ABSTRACT
Water-vapor permeation through metallic barriers deposited on polymer substrates has been an important technological issue because the performance of the barrier is critical to the reliability of flexible organic devices. For the development of long-lifetime flexible organic devices, two different sets of samples were designed and demonstrated from the viewpoint of the water-vapor transmission rate (WVTR). Aluminum (Al) and polyethylene terephthalate (PET) were chosen for the barrier layer and the polymer substrate, respectively. Two stacking structures, a single-layer (Al/PET) structure and a double-layer (Al/PET/Al) structure, were used for the WVTR measurement. For the single-layer structure, the WVTR decreases as the thickness of the barrier layer increases. Compared to the single-layer sample, the double-layer sample showed superior WVTR performance (by nearly three times) when the total thickness of the Al barrier was greater than 100 nm.
keyword : barrier Layer, water vapor transmission rate, WVTR, reliability, flexible electronic devices, stacking structure
|
|
Full Text
|
| PDF
|
|
ㆍ
Effect of Surface Treatment on Bioactivity of Ti-Ni Shape Memory Alloys
|
최미선 Mi Seon Choi , 남태현 Tae Hyun Nam |
KJMM 47(12) 881-886, 2009 |
ABSTRACT
Research into the replacement of injured systems and tissue in the human body is advancing rapidly. Recently, Ti-Ni shape memory alloys have shown excellent biofunctionality related to their shape memory effect and superelasticity. In this study, the effect of an acid or an alkali treatment on the bioactivity in 49Ti-Ni and 51.5Ti-48.5Ni alloys is investigated in an effort to utilize Ti-Ni alloy as a biomaterial. In addition, the biocompatibility in a SBF solution is assessed through in vitro testing. A porous surface was formed on the surface of both alloys after a chemical treatment. According to the in vitro test, apatite formed on the surfaces of both alloys. The forming rate of apatite in the Ti-rich alloy was faster that in the Ni-rich alloy. The formation of apatite provided proof of the bioactivity of the Ti-Ni alloy. A small quantity of Ni was eluted at the initial stage, whereas Ni was not found for 12 days in the Ti-rich alloy and for 8 days in the Ni-rich alloy. In the case of the treated 51.5Ti-Ni alloy, the shape memory property was worsened but the biocompatibility was improved.
keyword : Ti-Ni shape memory alloy, surface treatment, bioactivity, apatite, effluent of Ni
|
|
Full Text
|
| PDF
|
|
|
|