발간논문

Home > KJMM 논문 > 발간논문

Vol.7, No.1, 21 ~ 27, 1969
Title
Technical Notes on manufacturing of a Paper - making Dryer
최창옥 Chang Ock Choi
Abstract
Through the anther`s experiences on manufacturing of over forty paper-making dryers an optimum condition was drawn out. Although the shape of a dryer shell appears very simple, there are lots of difficulties in practical manufacturing such as composition and microstructure control for physical and mechanical requirements of a paper dryer. Sorbite structure is recommended as the most foreign makers prefer. The optimum allowances of shell shrinkage and machining are 8/1000 and l0㎜ out diameter (5㎜ inside dia)respectively. Pouring temperature was recommended to be near 1380℃ with the pouring rate of about 230㎏/sec. The 1:1:1 ratio of sprue, runner and gate and top pouring through 2 or 4 down sprues gave satisfied results of the castings.
Key Words
| PDF
대한금속∙재료학회 │ (06633) 서울시 서초구 서초대로 56길 38 대한금속∙재료학회 회관 (서초1동 1666-12번지)
Tel : 070-4266-1646 │ FAX : 02-557-1080 │ E-mail : metal@kim.or.kr
Copyright ⓒ 2013 사단법인 대한금속∙재료학회 All rights reserved.