발간논문

Home > KJMM 논문 > 발간논문

Vol.19, No.10, 857 ~ 864, 1981
Title
Stress Corrosion Behaviour of Al - Zn - Mg Weldments - Effects of Heat Input Rate and Postweld Heat Treatment
김용석Yong Seog Kim, 변수일Su Il Pyun
Abstract
The stress corrosion cracking (SCC) of Al-Zn-Mg welds in an aqueous solution of 3.5 wt.% NaCI (PH = 1) at 20±2℃ was studied with specimens under constant load, relative to heat input rate of the welding process and postweld heat treatment. Dendrite arm spacing determined by heat input rate was a major factor in the reduction of yield strength of welds. The failure time of welds was dependent on both heat input rate and postweld heat treatment: Electrochemical corrosion due to galvanic effect was influenced by the heat input rate. Heat input rate dependence of failure time showed that the higher the susceptibility to galvanic corrosion of welds, the lower the susceptibility to SCC of welds in the case of weld specimens, postweld-heat-treated under the same conditions (temperature and time). Weld specimens, postweld-heat-treated at 120℃ for 24 hrs showed the highest susceptibility to SCC followed by the specimen at 80℃ for 48 hrs and then that at 150℃ for 16 hrs. The postweld heat treatment effect on SCC was explained in terms of the ageing stage-SCC relation.
Key Words
| PDF
대한금속∙재료학회 │ (06633) 서울시 서초구 서초대로 56길 38 대한금속∙재료학회 회관 (서초1동 1666-12번지)
Tel : 070-4266-1646 │ FAX : 02-557-1080 │ E-mail : metal@kim.or.kr
Copyright ⓒ 2013 사단법인 대한금속∙재료학회 All rights reserved.