발간논문

Home > KJMM 논문 > 발간논문

Vol.26, No.11, 1028 ~ 1037, 1988
Title
A Study of Rapidly Solidified Cu - Ni - Sn - P Brazing filler Metal Containing Zr
김서원Seo Weon Kim, 김인배In Bae Kim
Abstract
Recently, new and improved brazing filler metals with selffluxing has been produced by rapid solidification in Cu-P based alloys. As the industrization goes on, it is required to decrease properly the brazing temperature of filler metals with good brazed joint characteristics such as mechanical strength, electrical properties etc. The brazed joint characteristics and the formation of amorphous were compared Zr-containing Cu-P based filler metal with Zr-free Cu-P based filler metal. As a result, it has been concluded that the brazed joint characteristics were simillar each other between the above two filler metals, and grass forming ability was accelerated by Zr addition.
Key Words
| PDF
대한금속∙재료학회 │ (06633) 서울시 서초구 서초대로 56길 38 대한금속∙재료학회 회관 (서초1동 1666-12번지)
Tel : 070-4266-1646 │ FAX : 02-557-1080 │ E-mail : metal@kim.or.kr
Copyright ⓒ 2013 사단법인 대한금속∙재료학회 All rights reserved.