발간논문

Home > KJMM 논문 > 발간논문

Vol.36, No.9, 1382 ~ 1391, 1998
Title
Effects of Heat - Treatment on Microstructures and Mechanical Properties of a 0.15C-1.5Si-1.5Mn TRIP Cold - Rolled Steel Sheet
이창길 , 김성준 , 박상곤 , 최일동 Chang Gil Lee , Sung Joon Kim , Sang Gon Park , Il Dong Choi
Abstract
The main emphasis of the present study has been placed on understanding the effects of heat-treatment (intercritical annealing and isothermal treatment) on the microstructures and mechanical properties of a cold-rolled 0.15C-1.5Si-1.5Mn steel sheet. The steel sheet was intercritically annealed, and isothermally treated at bainitic region following air cooling. Microstructural observation and tensile tests were conducted, and also the volume fractions of retained austenite were measured. The volume fractions of retained austenite and the mechanical properties of the steel sheet was changed dramatically by heat-treatment conditions, and the volume fractions of retained austenite increased with decreasing intercritical annealing temperature and isothermal treatment temperature, resulting in the improvement of tensile elongation and strength-ductility balance (TS×Elong.) without huge decrease of the yield or tensile strength. From the results of the present study, it is reached a conclusion that the conditions (temperature and time) of intercritical annealing and isothermal treatment should be established in consideration of the stability of austenite with the solubility of alloying elements in the austenite formed during the intercritical annealing.
Key Words
| PDF
대한금속∙재료학회 │ (06633) 서울시 서초구 서초대로 56길 38 대한금속∙재료학회 회관 (서초1동 1666-12번지)
Tel : 070-4266-1646 │ FAX : 02-557-1080 │ E-mail : metal@kim.or.kr
Copyright ⓒ 2013 사단법인 대한금속∙재료학회 All rights reserved.