|
Vol.47, No.4, 261 ~ 267, 2009
|
| Title |
| Effect of Surface Finish on Mechanical and Electrical Properties of Sn-3.5Ag Ball Grid Array (BGA) Solder Joint with Multiple Reflow |
| 성지윤 Ji Yoon Sung , 표성은 Sung Eun Pyo , 구자명 Ja Myeong Koo , 윤정원 Jeong Won Yoon , 신영의 Young Eui Shin , 정승부 Seung Boo Jung |
|
|
|
| Abstract |
| The mechanical and electrical properties of ball grid array (BGA) solder joints were measured, consisting of Sn-3.5Ag, with organic solderability preservative (OSP)-finished Cu pads and Electroless Nickel/Immersion Gold (ENIG) surface finishes. The mechanical properties were measured by die shear test. When ENIG PCB was upper joint and OSP PCB was lower joint, the highest shear force showed at the third reflow. When OSP PCB was upper joint and ENIG PCB was lower joint, the highest shear force showed at the forth reflow. For both joints, after the die shear results reached the highest shear force, shear force decreased as a function of increasing reflow number. Electrical property of the solder joint decreased with the function of increasing reflow number. The scanning electron microscope results show that the IMC thickness at the bonding interface gets thicker while the number of reflow increases. |
|
|
| Key Words |
| BGA, Solder joint, Pb-free solder, OSP, ENIG |
|
|
 |
|
