|
Vol.49, No.12, 967 ~ 977, 2011
|
| Title |
| The Effect of Paint Baking on the Strength and Failure of Spot Welds for Advanced High Strength Steels |
| 최철영 Chul Young Choi , 이동윤 Dong Yun Lee , 김인배 In Bae Kim , 김양도 Yang Do Kim , 박영도 Yeong Do Park |
|
|
|
| Abstract |
| Conventional fracture tests of resistance spot welds have been performed without consideration of the paint baking process in the automobile manufacturing line. The aim of this paper is to investigate the effect of the paint baking process on load carrying capacity and fracture mode for resistance spot welded 590 dual phase (DP), 780DP, 980DP, 590 transformation in duced plasticity (TRIP), 780TRIP and 1180 complex phase (CP) steels. With paint baking after resistance spot welding, the l-shape tensile test (LTT) and nano-indentation test were conducted on the as-welded and paint baked samples. Paint baking increased the load-carrying capacity of the resistance spot welded samples and improved the fracture appearance from partial interfacial fracture (PIF) to button fracture (BF). Improvement in fracture appearance after LTT is observed on weldments of 780 MPa grade TRIP steels, especially in the low welding current range with paint baking conditions. The higher carbon contents (or carbon equivalent) are attributed to the low weldability of the resistance spot welding of high strength steels. Improvement of the fracture mode and load carrying ability has been achieved with ferrite hardening and carbide formation during the paint baking process. The average nano-indentation hardness profile for each weld zone shows hardening of the base metal and softening of the heat affected zone (HAZ) and the weld metal, which proves that microstructural changes occur during low temperature heat treatment. |
|
|
| Key Words |
| advanced high strength steels, resistance spot welding, paint baking, nano-indentation, fracture behavior |
|
|
 |
|
