| Abstract |
| The metallic binder in WC-Co hard metals was effectively strengthened using the solid solution phases of Co and W. These metallic phases of Co and W (Co1-xWx, x<1), which consist of two kinds of structures (FCC and HCP), were successfully formed by hydrogen reduction of milled oxides mixtures (Co3O4 and WO3) at over 1000 ℃. When hard metals are fabricated by pressureless sintering of mixed WC and Co1-xWx, the hard metals containing the WC2 and M6C phases (Co2W4C and Co4W2C) have brittleness, which degrades their mechanical properties, like hard metals fabricated from mixtures of WC, Co, and W. By rapidly sintering the WC-Co1-xWx hard metals for 5 min the W2C and M6C phases were eliminated, and a two-phase (WC and the metallic phase of Co and W) region was successfully obtained. The mechanical properties of the WC-Co1-xWx hard metals showed higher values for both hardness (max. 18.8 GPa) and fracture toughness (8.5 MPa·m1/2) than conventional WC-Co hard metal (HV: 15.9 GPa, KIC: 6.9 MPa·m1/2). The enhancement in toughness was attributed to the solid solution strengthening of the metallic binder and the elimination of the WC2 and M6C phases. The suppression of grain growth due to the short duration of sintering also played a positive role in improving the hardness of the WC-Co1-xWx hard metals. The phase-controlled solid solution metallic binder could be the key material to enhance the hardness and toughness of hard metals.
(Received August 31, 2021; Accepted October 13, 2021) |
|
|
| Key Words |
| hard metal, solid solution, binder, spark plasma sintering, hardness, Toughness |
|
|
 |
|
