| Abstract |
| In this paper, we suggest a novel recycling process for hard metal sludge that does not use ammonium paratungstate. Ammonia, which in the conventional recycling process is essential for removing sodium and crystallized tungstate, was not used in the novel process. Instead of ammonia, acid was used to remove the sodium and crystallized tungstate resulting in the formation of tungstic acid (H2WO4). Tungsten powders were successfully synthesized by hydrogen reduction of the tungstic acid through H2O decomposition, WO3 to WO2 reduction, and tungsten metal formation. The tungsten powders prepared from tungstic acid were spherical in shape and had a higher sintering density than the facet-shaped tungsten powders prepared from tungsten oxide. The spherical shape of the tungsten powders enhanced their sinterability and resulted in an increase in the size of grains. This is a result of the high diffusion rate of the atoms along the particle surfaces. Despite having a higher density, the hardness of the sintered tungsten was lower than that of tungsten from tungsten oxide. High energy milling effectively reduced grain size and improved hardness. The hardness of the tungsten prepared from milled tungstic acid was enhanced to a value (max. 471 HV) higher than the best previously reported value (389 HV). In sum, tungsten can be hardened, thereby improving its sinterability and reducing grain size, with tungstic acid prepared using the proposed recycling process.
(Received August 31, 2021; Accepted September 29, 2021) |
|
|
| Key Words |
| hard metal, sludge, recycling, tungsten, sintering, hardness |
|
|
 |
|
